Backhoe Tie Switcher
The
Backhoe Tie Switcher system fits a wide range of manufacturers’ loader
backhoes. The attachments are modular in design allowing them to be easily
configured for various backhoe loaders. The system is designed to allow a
standard backhoe loader to be configured to be able to change out a railroad
tie in 2 minutes.
TIE
SWITCHER SYSTEM COMPONENTS
Tie Head
The
Tie Head is a combination robotic style 360° Rotating Tie Head with an integral
Scarifier Blade. The Tie Head grabs ties in any position for extraction,
insertion and placement. The built-in Scarifier Blade kicks the ties out and
back drags ballast. For wood ties, the Tie Head opens to 10 inches and closes
to zero. The ties are securely clamped and help with self-aligning tie pads.
The tie pads are the same width of the amount the tie sticks out under the rail
for precise placement. The tie head can be ordered with jaws for wood ties,
concrete ties or rail.
The Rail
Clamps are an integral part of the modular
Rear Rail Gear. The Rail Clamps travel up and down with the
rear Rail Gear. The backhoe can be clamp to the rail to stabilize the machine
on rail and used in conjunction with the Parallel Linkage Stabilizers to lift
the rail when removing railroad ties.
§
Non-Roating Ballast Regulator
Broom
§
Tamper
§
Tool Circuit
§
Spike Puller
§
Spike Driver
§
Front Bucket Mount Hose Reel and Tool Holder
We
can go the distance cause we\\\'re right on track!
Contact Information
Mitchell Equipment
Corporation
5275 N. Ann Arbor Rd.
Dundee, MI 48131
Toll Free: 1-888-553-5047
Telephone: 734-529-3400
Fax: 734-529-3433
E-Mail: Lovitt@Mitchell-Railgear.com
No comments:
Post a Comment